|
Bluetooth
GPS Data Logger
Introduction:
The
Bluetooth GPS Data Logger is a unique, user friendly Wireless interface for vehicle tracking device.
Bluetooth GPS Data Logger uses the Global Positioning System (GPS) to record vehicle movement, speed, route and duration of stops. This information can be displayed on a GIS mapping with MapInfo formatted while downloading data to PC. So user can view vehicle's activity in precise detail.
More Info on
Data Logger.
Key Features:
-
Bluetooth GPS receiver and GPS data
logger all in one
-
Optional Flash memory 4 MBytes
-
Data upload/download via mini USB
-
Motion sensor for auto power saving mode:
the device switches on/off when it is moving/motionless.
-
Power mode setting: GPS on only or
bluetooth and GPS both on
-
Support Speaker Sound, LED indications
-
Ultra low power consumption, up to
22hours of continuous use with battery fully charged
-
Rechargeable 1100mA Li-ion battery with
the original made-in-Japan battery cells
-
Cold/warm/hot start (42/38/3~6 seconds)
-
16 channels “All-in-View” tracking.
-
Compatible with bluetooth enabled devices
with Serial Port Profile (SPP)
-
High sensitivity: -152dbm
-
Build-in High Gain antenna
-
Data format: longitude, latitude, speed ,
UTC
-
GPS trace interval time setting from 1sec
~ 30 minutes
-
GPS Trace data by distance interval
2~65535 meters
Using GPS Datalogger with Google Earth
Our GPS Data logger is compatible with
latest mapping technologies like Google Earth. All recorded information can be downloaded to any windows computer through Bluetooth. The log files can be converted to Google Earth KML files for the 3D view in Free version of Google earth along with Satellite Imagery. The complete information like Start time, speed , direction and the traveled distance will be shown.
Learn more
Power Consumption for Different Power Setting Mode
|
Mode |
Status |
Max. |
Min. |
Avg. |
|
GPS+BT |
BT connecting |
89.1mA |
42.9mA |
50.4mA |
|
GPS+BT |
BT disconnecting |
67.3mA |
42.2mA |
46.1mA |
|
GPS only |
GPS connecting |
45.8mA |
40.2mA |
41.1mA |
|
GPS only |
GPS disconnecting |
43.8mA |
38.2mA |
39.1mA |
|
Auto power saving |
Power off |
0.42mA |
0.41mA |
0.41mA |
Specifications:
|
General |
Accuracy |
GPS Chip
|
NEMERIX GPS Module |
Position |
|
Frequency |
L1, 1575.42MHz |
3meters CEP (50%), without SA (Horizontal) 7 meters
(90%) |
|
C/A Code |
1.023MHz chip rate |
Velocity
|
0.1 m/sec. without SA |
|
Channels |
16 CH all in view tracking |
Time |
±100 ns synchronized to GPS time |
|
Internal Antenna |
Built-in low noise |
Datum |
|
I/O |
External antenna port MMCX |
WGS-84 (or by demanded) |
|
|
Mini.USB 1.1/2.0( 12Mb) |
Sensitivity |
|
Audio Output |
Speaker: 1Watt / 8 ohm |
To – 152 dBm |
|
LED: |
bluetooth, GPS, power status |
Dynamic Conditions |
|
|
Altitude |
<18,000m |
|
Acquisition Rate |
Velocity |
<515m/sec |
|
Cold Start |
45 sec, average |
Acceleration |
<4g |
|
Warm Start |
35 sec, average |
Motional Jerk |
20 m/sec. |
|
Hot Start |
5 sec, average |
Interface |
|
Reacquisition |
1 sec, average |
Communication Protocol |
|
Power |
Communicate with host platform via |
|
Built-in rechargeable 1100 mAh Li-ion battery
|
Bluethooth (class 2) serial port profile |
|
5 V DC input |
Bluetooth communication distance 10 M. TYP. |
|
Operation Current |
45 mAh (Typical) |
GPS Protocol |
|
Operation Time |
22 hrs, fully charged |
NMEA-0183 (V3.01) – GGA(1), GSA(3), |
Charging time
|
3 hrs. (Typical) |
GSV(3), RMC(1),VTG(1), Baud rate 38400 bps, |
|
Environmental |
Data bit: 8, stop bit : 1(Default)
* |
|
Operating Temperature |
- 20
℃
to + 60
℃ |
*
(1):1sec output 1msg , (3): 3sec output 1msg |
|
Relative Humidity |
5% to 90% non-condensing |
Device Size |
|
Accessories |
Dimension: 76 (L) X 46 (W) X 20 (H) mm |
|
Car charger (12V in, 5V output) |
Weight: 50g (without battery) |
|
AC adaptor (5.3V output, 500ma) |
|
|
